storing a pool table

Storing a Pool Table: How to Safely Move and Storage Options for a Pool Table

Listen to the article

How to take a pool table apart?

If you’re like most people, when you see a pool table for the first time, your mind starts racing. You start to imagine all of the possibilities: games night with friends, challenging yourself to better shots than ever before…

But how do you actually take it apart?

Here’s a helpful guide:

how to take a pool table apart

Step 1: Gather your supplies and label everything

How to disassemble a pool table? Start by unscrewing the bolts that hold the apron, crossbeam, and legs together. Label each part of the pool table and take pictures during each step to reference later.

Keep the hardware from each component together in sealed bags for easier storage. You will need a wrench, screwdriver, drill, and screwdriver bit.

Eye protection and a level are also recommended. The pool table should be assembled in the room where it will be living so that it can be moved later on if needed.

Step 2: Remove the pockets and rails

First, start by loosening the rail bolts underneath the table with a socket wrench. Next, take out the staples or screws that are holding the ball pockets to the rail, then place all hardware into one bag.

Label each rail and pocket according to its position, then label the bags with removable tape. Use a 14mm ratchet wrench to loosen and remove the bolts on each pocket casting.

Remove all 12 nuts and bolts from the pockets, then place them in a fifth plastic bag and seal them. Castings should be placed in a box for later transport.

Step 3: Disassemble the frame

The third step in pool table disassembly is to take apart the frame. You will need a few tools to get started, such as a staple puller or screwdriver. Most importantly, you will need to wear safety glasses when taking the billiard table apart. To begin, unscrew any bolt that is holding the side rails in place.

Step 4: Remove the slate

Slate screws are located in four different places on each slate piece. In order to remove the slate, you will need to drill out the screws and place them in a plastic baggie for safekeeping. Before removing any of the slate, be sure to mark each one with a letter (1-4), so that you can put them back in the correct order later. Once you have removed all four screws, gently lift up the slate and set it aside.

Step 5: Remove the felt

The fifth and final step to taking your drumhead off is to remove the felt. This can be tricky, but it is worth it to avoid damage. The felt protects the wood from scratches and dents, and it also prevents the head from slipping during transport. To remove the felt, you will need to carefully remove staples with a screwdriver or pliers. Once the staples are removed, you can gently peel the felt off of the head. If you get stuck, rip off the felt and replace it with a new one.

Step 6: Reassemble in your new location

Now that you have your pool table in pieces and transported to your new location, it is time to reassemble it. The process is similar to how you took it apart but in reverse. You will need to follow the same instructions as before but be prepared for a lot of work. It is important to remember that the pool table needs to be set up in the opposite order of how it was taken apart in order for it to be reassembled correctly.

Safe options for pool table long-term storage

Are you considering long-term storage for your pool table? Here are some safe options:

Self storage unit

A self storage unit is a storage facility that allows customers to store their belongings on-site. These units can be rented by day, week, month, or year.


If you want to store your pool table in the basement, make sure to follow these tips. First, keep it safe by keeping moisture and sunlight away from it. Next, store it on a level surface and make sure the furniture is weather-resistant. Finally, choose furniture that is easy to move around.


A garage is a room or building in which vehicles are kept, typically one that is separate from the living area of a house. Garages can be used for storage or as workspaces.

Tips for long-term storage of a pool table


Are you wondering how to store your pool table for the long term? Don’t worry, we have you covered.

Use a pool table lift

To move a pool table, use a pool table lift. Pool table lifts are available in different capacities and can be easily rolled from one location to the next. Work with two to four people to move the pool table. Use a dolly if necessary, but make sure the dolly is locked in place while loading the pool table. To move the pool table, use a pool table lift. You can use furniture sliders to move the pool table a short distance across the room.

Store in a dry, cool place

Store your pool table in a dry, cool place to prevent it from becoming damaged. If you must store it outside, cover it with a tarp or a moving blanket to protect it from the elements. You may also want to disassemble the table and store the parts separately.

Use a pool table storage system

A pool table storage system is a great way to keep your pool table safe and organized. It can help you store your pool table in the garage, basement, or another room in your house. A pool table storage system can also be used to move your pool table around if you need to.

There are many different types of pool table storage systems available on the market today. Some systems are portable, so you can take the system with you when you move your pool table. Other systems are stationary, so you can store your pool table in one place. There are also systems that combine both movability and storage capabilities.

Use a pool table cover

A pool table cover is a piece of furniture that is typically placed over a pool table to protect it from dust, dirt, and other debris.

Consider a climate-controlled storage unit

Consider a climate-controlled storage unit to keep it necessary.

If you are storing the table for an extended period of time, it is important to cover it with a piece of cloth or plastic in order to protect the surface from dust and other foreign your pool table safe and secure. The cue stick should be 58 inches in length. In addition, in order to protect your table in areas with extreme heat or cold.

The best option for storing a pool table is by keeping it in the original packaging so that you can move it around when a climate-controlled storage unit provides 5 feet of extra space around your table in every direction. You can also consider renting one for your pool table if you don’t have the time or money to build a new home bar.

Considering a climate-controlled storage unit is cost-effective and will prevent any problems later on. Wood, which can be susceptible to warping or mildew if it’s in constant temperature, won’t buckle up with the proper environment provided by this option.

In order to maintain a climate-controlled storage unit, it is important that you set up your own temperature controls. It is also imperative that the area of the unit remains clean and free from pests or mold. A climate-controlled storage unit is ideal for storing pool tables. The units are typically made of steel and have a set temperature range, depending on the material that is used.

Hiring help

Choosing the right way how to move a pool table is essential. There are pool table mover companies that advertise moving services and storing a pool table specifically, but you may also need help with how to set up a pool table after it has been moved. Hiring help can be difficult when dealing with expensive furniture, so finding people who specialize in this field and have experience is important.

When it comes to hiring help for a move, the estimate could range from several hundred dollars up to several thousand depending on size. It also depends if stairs are needed or not. If you need help with a large move, it is best to hire professional movers. They not only come highly recommended but also charge more than they would for local moves.


Here are some frequently asked questions about storing pool tables:

What are the different parts of a pool table?

A pool table is a large, rectangular object that contains a number of different parts. The main areas of a pool table are the rail assembly, felt, aprons, bumpers, and slate. The pool table assembly contains the wooden rail, bumpers and to which the apron attaches. The cushion or bumpers is covered in felt and is usually a 75% wool and 25% nylon blend. The felt covers the playing surface and the rail bumpers. There are (3) pieces of slate which can be wood backed or unbacked. The frame is the base of the pool table on which the slate sits. A pool table needs screws, bolts, and pockets in order to be assembled correctly. Pool tables often have a difficult time being assembled and require careful labelling of each part

What tools do you need to take a pool table apart?

You will need a flathead screwdriver, socket wrench, power drill, and safety goggles to take a pool table apart. Pool tables are very complex and must be broken down into individual parts in order to be moved. To take a pool table apart, you will need the right tools and protection. Be prepared before starting by wearing gloves and eye protection.

You will need an electric drill, a flat-head screwdriver, a set of socket wrenches, pliers, and a screwdriver bit. You will also need bubble wrap and markers to mark the pieces you are taking apart.

Can you take a pool table apart yourself to move it?

There are different factors to be considered before performing this task. How much does a pool table weigh? If you want to move a pool table yourself, it’s important to take it apart first. Make sure to label everything you remove during the disassembly process, and take care when moving a pool table so that you don’t lose any screws or other pieces. You will need a staple puller, flathead screwdriver, safety goggles, socket wrench, and power drill to take a pool table apart. Follow the instructions that come with your pool table if you want to move it yourself. Pool tables can be transferred by following the instructions provided and removing the pool table from its original location.

How do you take apart a pool table and store it?

Take apart the pool table as carefully as possible to avoid losing any parts. Use a staple puller, flathead screwdriver, safety goggles, socket wrench, and power drill to disassemble the pool table.

Take careful notes of what was removed so that reassembly is easier. Refer to your pool table’s instruction manual to disassemble it.

Unscrew the bolts and grasp each rail one by one. If the rails are attached at the corners, enlist the help of a friend to turn them upside down so you can disassemble them.

You should mark all the pieces of your pool table so you can quickly reassemble them in your new home.

How long does it take to disassemble a pool table?

It can take a little while to disassemble a pool table, depending on the make and model. It is helpful to have the owner’s manual for the table if you need help. It can usually be done in an hour or less if you’re familiar with how it works. It usually takes around 2 hours to disassemble a pool table. Make sure you have all the necessary tools and supplies before starting.

Do you have to replace felt when moving a pool table?

If the felt is glued on, use your screwdriver or pliers to remove the staples. Remove each rail and side pocket one at a time to get access to the slate. Flip the rails over if needed in order to disassemble the pool table properly.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *